EPSON AcuLaser C8500
FIP-1.48 Checksum Error (DIMM Slot A, B, C Related)
FIP-1.48 Checksum Error (DIMM Slot A, B, C Related)
FIP-1.48 Checksum Error (DIMM Slot A, B, C Related)
FIP-1.48 Checksum Error (DIMM Slot A, B, C Related)
Step
*Initial setting
• Remove all of the option units related to electricity and modules.
1
Bring everything back to a normal status.
• Check if all connectors are properly connected to the CONTROLLER PWB.
*DIMM check
• Insert the DIMM in the socket until it locks securely.
NOTE: Since the DIMM has the right direction to insert , make sure to insert it in
2
the correct direction.
• Check if the DIMM is available for this printer, AcuLaser C8500.
• Other than those above, replace the CONTROLLER PWB.
Troubleshooting
Check
Level 1 FIP (Fault Isolation Procedure)
Treatment
Yes
Replace and remount
Go to step 2.
the concerned part(s).
Replace and remount
the concerned part(s).
Problem solve.
Revision C
No
5-76