Ohp Sensor (Pl4.4.25) Removal - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.2.8.20 OHP SENSOR (PL4.4.25) Removal

1. Pull out the MSI/REGI HIGH ASSY.
2. Remove the MSI/REGI HIGH ASSY. (See Section 3.2.8.1.)
3. Remove the MAIN P/H FRAME ASSY. (See Section 3.2.8.6.)
4. Remove the screw (gold, tapping, 8mm) securing the P/H SENSOR ASSY,
and remove the P/H SENSOR ASSY.
5. Disconnect OHP SENSOR connector (P/J98).
6. Remove the screw (silver, 6mm) securing the OHP SENSOR and remove
the OHP SENSOR.
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures
Figure 3-50. OHP SENSOR Removal
Revision C
3-46