Details Of Menus And Settings; Printing Menu; Tray Menu - Epson AcuLaser C8500 Service Manual
Color laser page printer
Hide thumbs
Also See for AcuLaser C8500:
- Quick reference manual (21 pages) ,
- Unpacking manual (20 pages) ,
- Setup manual (84 pages)
Table of Contents
Advertisement
EPSON AcuLaser C8500
1.6.3 Details of Menus and Settings
This section contains the AcuLaser C8500 specific information on the menus
and settings.
1.6.3.1 Printing Menu
PAPER SOURCE
Selects the paper source when "Paper Type" = "Normal".
Auto:
Paper is fed from the paper source that holds the selected
paper type and size.
MP:
Paper is fed from the MP tray.
LC1:
Paper is fed from the 1st paper cassette.
LC2:
Paper is fed from the 2nd paper cassette.
LC3:
Paper is fed from the 3rd paper cassette.
Depending on the setting for Page Size or Paper Type, the available paper
sources are restricted.
WIDE A4
Effective only in the LJ4 mode.
Off:
Printable area for graphics remains the ordinal size.
On:
Printable area for graphics is expanded.
OUT BIN
Selects the output tray.
Face-down:
Ejects into face-down tray.
Face-up:
Ejects into face-up tray.
Depending on the setting for Page Size or Paper Type, the available paper
sources are restricted.
PRODUCT DESCRIPTIONS
QUANTITY
Number of copies can be set for collating. Since it has priority over the setting
made for "Copies", the value set for "Copies" is ignored when the selected
number of copies for "Quantity" is two or more. This setting is made only by the
PJL, EJL, ESC/Page, or ESC/PageColor mode only. The setting value is not
stored. If one-job data is too large, the printer indicates "Collate was disabled"
and prints one copy.
MANUAL FEED
Determines whether or not to generate the message "Manual Feed xxx yyyy"
before printing.
Off:
Manual Feed is disabled.
On:
Manual Feed is enabled. "Check Paper Size" error is not
generated regardless of the setting for "Size Ignore" for
"Config Menu". With "Manual Feed" on, the printer prints in 1-
UP mode only.
1.6.3.2 Tray Menu
MP TYPE
Specifies the type of the paper set in the MP tray.
Plain:
Ordinal paper such as copy paper
Letterhead:Letter paper
Recycled: Recycled paper
Color:
Color paper
Trnsprncy: OHP sheet
Labels:
Labels
When "Paper Size" = "Normal" and "Paper Source" = "Auto", the printer refers
to the values set for this item to search the paper sources that hold the
selected paper type, and, of among, it selects the paper source that also
matches the selected paper size.
Panel Setting
Revision C
1-46
Advertisement
Table of Contents
Troubleshooting
