Epson AcuLaser C8500 Service Manual page 55

EPSON AcuLaser C8500
SelecType button (K) (or Shift button)
Used to select OneTouch mode 1 / OneTouch mode 2 / SelecType mode, as
follows:
The first push of the button puts the printer in OneTouch mode 1.
Pressing this button in the OneTouch mode 1 puts the printer in OneTouch
mode 2.
Pressing this button in the OneTouch mode 2 activates the SelecType
mode to enter the initial level of SelecType mode. (The "Test Menu"
appears.)
Menu button (L)
Pressing this button activates the SelecType mode. The initial level of the
mode ("Test Menu") appears. In the SelecType mode, this button is used
to select the setting menu, the primary level of the mode.
In OneTouch mode 1, used to select the value for "Paper Source".
In OneTouch mode 2, used to select the item for "RITech".
In SelecType mode, used to select the setting menu.
NOTE: If this button is pressed with the Shift button held down, setting
values and items scroll backward.
Item button (M)
Pressing this button brings up the item that was last selected.
In OneTouch mode 1, this button is used to select the value for "Paper
Size".
In OneTouch mode 2, this button is used to select the value for "Copies".
In SelecType mode, this button is used to select the setting item.
NOTE: If this button is pressed with the Shift button held down, setting
values and items scroll backward.
PRODUCT DESCRIPTIONS
Value button (N)
Pressing this button enables the item that was last selected.
In OneTouch mode 1, used to select the value for "Manual Feed".
In OneTouch mode 2, used to select the value for "MP Tray Size".
In SelecType mode, used to select the value for the currently selected
setting item. The next available value for the item is indicated.
NOTE: If this button is pressed with the Shift button held down, setting
values and items scroll backward.
Enter button (O)
Pressing this button generates "Status Sheet" in "Test Menu".
In OneTouch mode 1, used to select the value for "Orientation".
In OneTouch mode 2, used to select the value for "Toner Save Mode".
In SelecType mode, the setting value is confirmed and printing or other
functions are activated.
NOTE: If this button is pressed with the Shift button held down, setting
values and items scroll backward.
Reset button (Continue button + Alt button) (K + J)
Pressing this button with the Alt button held down causes the printer to stop
printing and reset. After the message "Reset" is indicated on the LCD, if the
both buttons are kept pressed for more 5 seconds, "Reset All" is indicated and
warm boot is performed.
Control Panel
Revision C
1-35