Epson AcuLaser C8500 Service Manual page 502

EPSON AcuLaser C8500
6. After removing the toner cartridge from its sealed package, hold the
toner cartridge by both ends and shake firmly 7 or 8 times.
7. While turning the ROTARY FRAME ASSY, mount each toner
cartridge.
NOTE:Be sure to mount the toner cartridge in the insertion section
of the same color.
8. Close the FRONT COVER ASSY.
9. Pull out the UNIVERSAL CASSETTE and push up the BOTTOM
PLATE ASSY for the UNIVERSAL CASSETTE and lock in the lower
position.
10. Set paper in the UNIVERSAL CASSETTE.
NOTE: Observe the following when setting paper.
1) Align all 4 corners of the paper before setting.
2) Place the paper underneath the tabs in the front of the
paper tray.
3) Adjust the paper guide to the size of the paper.
11. Adjust the paper guide to the size of the paper. Insert the
UNIVERSAL CASSETTE and close.
12. Set paper in the MSI TRAY ASSY.
NOTE: Observe the following when setting paper.
1) Align all 4 corners of the paper before setting.
2) Adjust the paper guide to the size of the paper.
13. Connect the power cord.
14. Turn on the printer's power switch and turn the power on.
15. Test-print several pages from each paper feeder to make sure
everything is functioning properly.
Chapter 6 Maintenance
Revision C
6-23