Msi Assy (Pl4.1.6) Removal - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.2.8.3 MSI ASSY (PL4.1.6) Removal

1. Draw out the MSI/REGI HIGH ASSY.
2. Disconnect 2 connectors (P/J92B and P/J113B) that connect the MSI
ASSY and MAIN P/H FRAME ASSY.
3. Remove 2 screws (gold, tapped, 8 mm) securing the MSI ASSY.
4. Remove 2 screws (gold, tapped, 10 mm) securing the MSI EARTH WIRE
to the MAIN P/H ASSY and remove the MSI ASSY.
C H E C K
When installing the MSI ASSY, make sure the MSI CLUTCH
P O I N T
gear in the MSI ASSY and PRE-REGI. GEAR1 in the MAIN P/
H ASSY are properly meshed.
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures
Figure 3-33. MSI ASSY Removal
Revision C
3-34