Exterior View And Parts - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

1.2.11 Exterior View and Parts

The table below lists the major exterior parts names. For the corresponding
location, see the following figures. Note if any part names differ from the
descriptions in the User's Guide, they are shown in the brackets.
Table 1-21. Exterior View and Parts
Part name
a Control Panel
Cover A / EXIT UPPER COVER
b
(Output path cover)
c STOPPER COVER (Stopper)
d FRONT COVER
e Face-Up Tray
f Standard tray/MSI Tray/MP Tray
Standard Universal Cassette
g
(Standard lower cassette)
h RIGHT COVER
Unit C / MSI ASSY
i
(Paper path unit)
j Parallel I/F Connector
k Ground screws
l Interface card slot cover
m Power switch
n AC inlet
o Fuser unit/Unit B
PRODUCT DESCRIPTIONS
Part Name
s Ethernet I/F connector
Mounting screw hole for EPSON
t
RIP Station 5300
FRONT MID COVER
u
(Duplex unit slot cover)
v Paper cassette 2 / LC2 (Option)
w Paper cassette 3 / LC3 (Option)
x Cover E / FEEDER CHUTE ASSY
y Unit B / DUP TRANSPORT ASSY
z INVERTER ASSY
A Cover F / INVERTER ASSY
B Unit G / DUPLEX UNIT
DUP TRANSPORT ASSY
C
Connector
D INVERTER ASSY Connector
Large Capacity Paper Unit
E
Connector
F Connector
G Large Capacity Paper Unit
Specifications
Table 1-21. Exterior View and Parts
Part name
Cover D/TURN CHUTE COVER
p
(Paper cassette cover)
q Filter Assy
Option slot cover (for EPSON RIP
r
Station 5300)
Figure 1-8. Exterior Parts - Top View
Revision C
Part Name
H Logo Plate
I 500-Sheet Paper Cassette Unit
- -
1-23