2Nd Btr Assy (Pl8.1.22) Removal - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.2.11.4 2ND BTR ASSY (PL8.1.22) Removal

1. Remove the FUSER ASSY. (See Section 3.2.12.1.)
2. Remove the BELT CLEANER ASSY. (See Section 3.2.11.3.)
NOTE: Be sure not to touch the IBT ASSY or the roller of the 2ND BTR
ASSY, or allow the roller of the 2ND BTR ASSY to come in contact
with any other parts while performing the following.
3. Pull out and remove the 2ND BTR ASSY from the left side of the printer.
C H E C K
When mounting, be sure to push the 2ND BTR ASSY firmly
P O I N T
in place.
After replacing the 2ND BTR ASSY with a new part, enter
C A U T I O N
the maintenance mode to reset the counter (2ND BTR
Clear). (For details, see Chapter 6.)
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures
Figure 3-70. 2ND BTR ASSY Removal
Revision C
3-64