Fuser In Sensor (Pl9.4.4) Removal - Epson AcuLaser C8500 Service Manual

Color laser page printer

Hide thumbs Also See for AcuLaser C8500:

Table of Contents

EPSON AcuLaser C8500

3.2.12.18 FUSER IN SENSOR (PL9.4.4) Removal

1. Remove the FUSER ASSY. (See Section 3.2.12.1.)

2. Remove the 2 screws securing the HORIZONTAL CHUTE (gold, tapping,

10mm). Lift and remove the HORIZONTAL CHUTE together with the

FUSER PAPER GUIDE.

3. Remove the 2 screws (gold, tapping, 10mm) securing the FUSER

BOTTOM COVER. Slide the FUSER BOTTOM COVER to the rear and

4. Unhook the FUSER IN HOLDER from the FUSER TRAY and remove.

5. Disconnect the FUSER IN SENSOR connector (P/J117).

6. Unhook the FUSER IN SENSOR from the FUSER TRAY and remove.

Figure 3-95. FUSER IN SENSOR Removal - 1

Disassembly/Assembly/Adjustment

Disassembly/Assembly Procedures

Figure 3-96. FUSER IN SENSOR Removal - 2