EPSON AcuLaser C8500
3.2.14.3 FUSER MOTOR ASSY (PL11.1.4) Removal
1. Remove the REAR COVER ASSY. (See Section 3.2.5.8.)
2. Disconnect the connector (P/J47) from the FUSER MOTOR ASSY.
3. Remove the 3 screws (black, w/collar, 4mm) securing the FUSER MOTOR
ASSY, and remove the FUSER MOTOR ASSY.
Figure 3-109. FUSER MOTOR ASSY Removal
Disassembly/Assembly/Adjustment
3.2.14.4 P/H MOTOR ASSY (Pl11.1.5) Removal
1. Remove the REAR COVER ASSY. (See Section 3.2.5.8.)
2. Remove the DRIVE MOTOR PWB. (See Section 3.2.14.5.)
3. Remove the 3 screws (black, w/collar, 4mm) securing the P/H MOTOR
ASSY, and remove the P/H MOTOR ASSY.
Disassembly/Assembly Procedures
Figure 3-110. P/H MOTOR ASSY Removal
Revision C
3-95