Printer Power cord Remove all the blue tape and packing material inside and around the printer. The tape may be in slightly different places on your printer, so check carefully. Don’t touch this cable Slide the paper support into the groove on the back of the sheet feeder.
Power On Power On Connect the printer’s power cord to the printer, then plug it into a standard electrical outlet. Press the printer’s power button until the green power light comes on. CAUTION: Use only the printer’s Install Ink Cartridges Install Ink Cartridges Lower the printer’s output tray, pull...
5 minutes. Connect the Printer Connect the Printer Printer cables are not included with your printer. You need only one of the following cables: • USB cable (Windows ® or Macintosh •...
You see the Options Menu. Continue with the “Finishing Windows Installation” instructions to the right to complete your software installation. Windows Me and 98 Turn on your computer. (Make sure your printer is still on.) Wait until you see the Add New Hardware Wizard. Windows Me Put the EPSON CD-ROM in your drive.
Windows 2000 Turn on your computer. (Make sure your printer is still on.) Wait until you see the Found New Hardware Wizard screen. Then put the EPSON CD-ROM in your drive. After a moment, click Next. You see a screen indicating that Windows has found an unknown device.
Page 6
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON Software is a trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Need help?
Do you have a question about the Stylus C84 and is the answer not in the manual?
Questions and answers