Operation Mode - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

2.6 Operation Mode

The printer is equipped with the following 5 modes:
WARM UP MODE
Mode in which the printer warms up (until ready to print).
READY MODE
Mode in which the printer is ready to print after the WARM UP mode.
RUNNING MODE
Mode in which the printer is printing.
SLEEP MODE
Mode in which the FUSER control temperature is set to low to save power.
DEEP SLEEP MODE
Mode in which power supply to the FUSER, FUSER FAN and DEVE. FAN
is cut off to save power.
DIAG TEST MODE
Mode in which the printer is able to receive diagnostics or is running
diagnostics.
ERROR MODE
Mode in which the printer detects some kind of problem, not including
errors related to no paper tray, paper empty, or life warning.
Operating Principles
Transition from mode to mode is as shown below
Figure 2-52. Translation of Operation Mode
Revision C
2-48