P/H Drive Assy (Pl11.1.1) Removal - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.2.14.1 P/H DRIVE ASSY (PL11.1.1) Removal

1. Remove the REAR COVER ASSY. (See Section 3.2.5.8.)
2. Remove the HVPS. (See Section 3.2.16.2.)
3. Remove the DRIVE MOTOR PWB. (See Section 3.2.14.5.)
4. Remove the P/H MOTOR ASSY. (See Section 3.2.14.4.)
5. Remove the screw (silver, w/collar, 6mm) securing the MOTOR PWB
BRACKET to the P/H DRIVE ASSY, and remove the MOTOR PWB
BRACKET.
6. Free the 2 wires by removing from the clamp of the P/H DRIVE ASSY.
7. Remove the 5 screws (black, w/collar, 10mm) securing the P/H DRIVE
ASSY, and remove the P/H DRIVE ASSY together with the 2 MOTOR
PWB SUPPORTS.
8. Remove the 2 MOTOR PWB SUPPORTS from the P/H DRIVE ASSY.
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures
Figure 3-107. P/H DRIVE ASSY Removal
Revision C
3-93