R/H Inner Cover Assy (Pl1.1.15) Removal - Epson AcuLaser C8500 Service Manual

Color laser page printer

Hide thumbs Also See for AcuLaser C8500:

Table of Contents

EPSON AcuLaser C8500

3.2.5.7 R/H INNER COVER ASSY (PL1.1.15) Removal

1. Open the FRONT COVER.

2. Remove the TOP COVER ASSY. (See Section 3.2.5.4.)

3. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)

4. Remove the TENSION LEVER. (See Section 3.2.11.1.)

5. Remove the IBT UNDER COVER ASSY. (See Section 3.2.5.6.)

NOTE: As a result of the next step, the FRONT COVER ASSY will be

supported by the left hinge and left COVER SUPPORT only.

Therefore, be careful not to add excess force to the FRONT COVER

6. Remove 1 screw (gold, with a washer, 8mm) fixing the COVER SUPPORT

in the FRONT COVER ASSY to the right part of the printer body.

7. Remove 2 screws (silver, cup head, 6mm) securing the R/H INNER

COVER ASSY. Then tilt the R/H INNER COVER ASSY forward and lift it

up to remove.

Disassembly/Assembly/Adjustment

Disassembly/Assembly Procedures

Figure 3-9. R/H INNER COVER ASSY Removal