Epson AcuLaser C8500 Service Manual page 211

EPSON AcuLaser C8500
23. Remove the E-ring securing the rear of the ROTARY FRAME ASSY and
remove the ROTARY REAR BEARING.
NOTE: Keep the front shaft of the ROTARY FRAME ASSY from falling from
the printer frame while performing the following step by leaving the
front of the ROTARY FRAME ASSY supported.
24. Remove the front ROTARY FRONT BEARING of the ROTARY FRAME
ASSY.
25. After removing the front shaft of the ROTARY FRAME ASSY from the slot
of the printer frame, slide the ROTARY FRAME ASSY forward, remove the
rear shaft from the printer frame, lift the ROTARY FRAME ASSY from the
rear and remove.
Figure 3-65. ROTARY FRAME ASSY Removal - 2
Disassembly/Assembly/Adjustment Disassembly/Assembly Procedures
Revision C
3-59