Paper Feeder; Turn In Chute (Pl3.1.21) Removal - Epson AcuLaser C8500 Service Manual

Color laser page printer

Hide thumbs Also See for AcuLaser C8500:

Table of Contents

EPSON AcuLaser C8500

3.2.7 Paper Feeder

1. Remove 3 screws (silver, cup head, 6 mm) securing the RIGHT COVER

ASSY and remove the RIGHT COVER ASSY.

2. Open the TURN CHUTE COVER.

3. Remove 1 screw (silver, with washer, 6 mm) securing the TURN COVER

STOPPER to the main body .

4. Pushing the peg at the front edge of the TURN CHUTE UP ASSY with a

tool like a screw driver, turn the TURN CHUTE UP ASSY to the right to

release its rear peg and remove the TURN CHUTE UP ASSY.

5. Remove the R/H LOWER BRACKET.

NOTE: In the next step, be careful not to damage the hinge part of the TURN

6. Press the hinge at the rear part of the TURN IN CHUTE to release the peg

and swivel the TURN IN CHUTE right around the front side as the

supporting point.

Disassembly/Assembly/Adjustment

Disassembly/Assembly Procedures

Figure 3-21. TURN IN CHUTE Removal - 1