Log Display - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

4.2.4.3 Log Display

You can display the communications process between the Dialog
Commander and MCU PWB in the [Log Window].
NOTE: When using the Diag function, always display [Log Window] and
save the log.
DISPLAYING THE LOG WINDOW
1. Move the cursor to the plain area in the [Tsubaki Service
Commander] main window and right-click to display the [Log
Window Open] button.
2. Click the [Log Window Open] button to display the [Log Window].
3. The commands and status sent and received are displayed in Hex
code in the [Log Window].
4. In addition, self-issued statuses (not displayed in the [Status]
column) which do not require commands from the printer are also
displayed.
Chapter 4 Diagnostics
NOTE: Statuses which are not displayed in the [Status] column but are
displayed in the [Log Window] are as follows.
IGNORED[41 XX(CMD) XX(REASON)]
PFA[30 XX(AMODE) XX(SHEET1) XX(SHEET2)]
ENGERR[31]
ERRRV[32]
ENGWRN[33]
SCH[34 XX(STSMODE) XX(STSMODE2) XX(STSCALL)]
PFA2[35 XX(SHEET)]
COLOR[36 XX(PLANE)]
PPOUT[20 XX(DEST) XX(DOPT) XX(SHEET)]
PCH[21 XX(TRAY) XX(SIZE) XX(MEDIA)]
PPOUT2[22 XX(DEST) XX(DOPT) XX(SHEET)]
DCH[23 XX(DEST) XX(INFO_D)]
Revision C
Communications
established
Status
Command
4-12