3.2.3 Housing Removal
This section describes how to remove the housing.
3.2.3.1 Top Cover Removal
Two people are required to remove the top cover; one person must hold the top cover while the other
removes the screws. If the top cover is not supported while the screws are removed, the weight of
the top cover may damage the rear hinges.
1. Open the top cover.
2. While someone supports the top cover, remove the four screws (two on the right and two on the left)
securing the top cover. Then remove the cover.
CAUTION
Top Cover
Figure 3-16. Top Cover Removal
DISASSEMBLY AND ASSEMBLY
3-13