Paper Empty Sensor (Pe1) Removal; Top Cover And Rear Cover Removal - Epson EPL-5900 Service Manual

EPSON EPL-5900/EPL-5900L

4.3.11 Paper Empty Sensor (PE1) Removal

1. Remove the Right Cover, Left Cover, Paper Separator Unit, Front Cover and Printing
Head Unit.
(See "4.3.2 Paper Separator Unit Removal (p.101)")
(See "4.3.3 Right Cover Removal (p.101)")
(See "4.3.4 Control Panel Removal (p.102)")
(See "4.3.7 Left Cover Removal (p.105)")
(See "4.3.8 Front Cover Removal (p.105)")
(See "4.3.10 Printing Head Unit Removal (p.106)")
2. Remove the Paper Empty Sensor (PE1), and pull out the connector.
(See Figure 4-14)

4.3.12 Top Cover and Rear Cover Removal

1. Remove the Right Cover and Left Cover.
(See "4.3.3 Right Cover Removal (p.101)")
(See "4.3.7 Left Cover Removal (p.105)")
2. Remove the Top Cover and Rear Cover. (Six screws)
(See Figure 4-15)
Disassembly and Assembly
3541
3727
Disassembly and Reassembly of the Printer Body
Figure 4-14. Paper Empty Sensor (PE1) Removal
3541
1305
Figure 4-15. Top Cover and Rear Cover Removal
Revision B
107