Disassembly And Assembly; Outer Covers Removal; Opening The Top Cover; Left Cover Removal - Epson EPL-N2000 Service Manual

Disassembly and Assembly

3.2 DISASSEMBLY AND ASSEMBLY
This section describes and illustrates the procedures for disassembling and assembling the
components of the EPL-N2000. The assembly procedures are not described, except for special notes
where necessary, because assembly can be accomplished by performing disassembly in reverse
order.

3.2.1 Outer Covers Removal

This section describes how to remove the left cover, right cover, front cover, top cover, rear cover,
right front cover, right rear cover and the control panel. See the figure below which shows the
location of the covers and screws.

3.2.1.1 Opening the Top Cover

1. Push the blue release lever and open the top cover.
Never touch the following parts when opening the top cover.
Fusing unit: It remains hot for a while after the printer stops printing.
Transfer Roller: Contact with the roller causes printing deterioration .
Dust tight t glass: Contact with the dust tight glass causes printing deterioration .

3.2.1.2 Left Cover Removal

1. Loosen 2 CCS screws (3 X 8) from the top and rear parts of the left cover .
2. Remove the left cover.

3.2.1.3 Right Cover Removal

1. Loosen 3 CCS screws (3 X 8) from the upper part of the right cover.
2. Remove the right cover.

3.2.1.4 Top Cover Removal

1. Remove a screw from the cover.
2. Remove a shoulder screw from the top cover.
3. Remove a CCB screw (3 X 8) from the top cover.
4. Remove the top cover.
3-6
CAUTION
EPL-N2000 Service Manual
Rev. A