Fuser Chute Fan Removal (Pl9.4.10) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.12.22 FUSER CHUTE FAN Removal (PL9.4.10)

1. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
2. Remove the two screws (gold, with a washer, 8 mm) securing the
HORIZONTAL CHUTE, and then lift up the HORIZONTAL CHUTE
to remove.
3. Remove the four screws (gold, tapped, 10 mm) securing the FUSER
BOTTOM COVER, and remove the FUSER BOTTOM COVER.
Chapter 3 Disassembly and Assembly/Adjustment
4. Remove the FUSER CHUTE FAN from the FUSER TRAY.
5. Disconnect the connector (P/J80) for the FUSER CHUTE FAN.
Figure 3-115. FUSER CHUTE FAN Removal
Revision B
3-97