Fan Motor (M3) Removal - Epson ActionLaser 1600 Service Manual

Fan Motor (M3) Removal

1. Open the top cover.
cartridge to protect it from light or place it in a dark area.
2. Remove the control panel. (Refer to page 3-10.)
3. Remove the paper cover.
4. Remove the right cover and left cover. (Refer to pages 3-11 and 3-12.)
5. Remove the top cover. (Refer to pages 3-11 and 3-12.)
6. Remove the rear frame. (Refer to page 3-13.)
7. Remove 2 CCB (M3 x 8) screws, and remove the fan motor (M3)
EPSON ActionLaser 1600 Service Manual
Remove the imaging cartridge. Cover the imaging
Figure 3-17. Removing the Fan Motor
Disassembly and Assembly
3-21