EPSON Stylus Pro 10000/10000CF/10600
4.3.1.6 I/H Cover ASSY Removal
1.
Remove R Side Cover. (Refer to 4.3.1.4 "R Side Cover Removal".)
2.
Remove two screws securing the R Inside Cover, then remove it.
Screws
Figure 4-19.
3.
Remove three screws (Left side: one, Right side: two) securing the hinges.
Figure 4-20.
Disassembly & Assembly
Thank You For Using TheServiceManualShop.com
R inside Cover
Screws
Thank You For Using TheServiceManualShop.com
4.
Opening I/H Cover by pushing the central upper part (the cover latch location) of
it, then remove I/H Cover with the hinge of the right and left.
5.
Removing the E ring, then I/H Cover and slowing-down gear are separated.
Slow-down gear
I/C Holder Cover
When installing the "I/H Cover", make sure the position of cover
C H E C K
latch and cover interlock are placed correctly with frame.
P O I N T
Switch lever
Disassembly
Revision D
E ring
Figure 4-21.
Figure 4-22.
125