Msi Edge Sensor Removal (Pl4.2.6); Msi Short N/P Sensor Removal (Pl4.2.7) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.7.6 MSI EDGE SENSOR Removal (PL4.2.6)

1. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
2. Remove the MSI ASSEMBLY. (See Section 3.2.7.2.)
3. Remove the MSI FRONT COVER. (See Section 3.2.7.3.)
4. Remove the MSI REAR COVER. (See Section 3.2.7.4.)
5. Remove the MSI TOP COVER ASSEMBLY. (See Section 3.2.7.5.)
6. Remove 2 screws (gold, tapped, 8mm) securing the MSI EDGE
SENSOR, and remove the EDGE SENSOR.
Figure 3-32. MSI EDGE SENSOR Removal
Chapter 3 Disassembly and Assembly/Adjustment

3.2.7.7 MSI SHORT N/P SENSOR Removal (PL4.2.7)

1. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
2. Remove the MSI ASSEMBLY. (See Section 3.2.7.2.)
3. Remove the MSI FRONT COVER. (See Section 3.2.7.3.)
4. Remove the MSI REAR COVER. (See Section 3.2.7.4.)
5. Remove the MSI TOP COVER ASSEMBLY. (See Section 3.2.7.5.)
NOTE: In the following step, be careful not to break the hooks for
the MSI SHORT N/P SENSOR.
6. Release the hooks securing the MSI SHORT N/P SENSOR to the
MSI TOP COVER, and remove the MSI SHORT N/P SENSOR.
Figure 3-33. MSI SHORT N/P SENSOR Removal
Revision B
3-31