Paper Support Assy./Housing (Left/Right)/Stacker Assy. Removal - Epson R200 - Stylus Photo Color Inkjet Printer Service Manual

EPSON Stylus Photo R200/R210
2.3.1 Paper Support Assy./Housing (left/right)/Stacker
Assy. removal
o
External View
Housing, Right
6
5
Paper Support Assy.
Backside
3
2
C.B.P 3x8 (4-6kgf/cm)
4
Carriage lock lever
Bottom (right side)
Figure 2-2. paper support assy./Housing (left/right)/Stacker assy. removal
DISASSEMBLY AND ASSEMBLY
Housing, Left
6
5
3
1
Protrusion for paper
support assy.
C.B.P 3x8 (4-6kgf/cm)
4
Bottom (left side)
Disassembly
o
Parts/Units which should be removed before removing paper support assy./
Housing (left/right)/Stacker assy.
Non
o
Disassembly Procedure
n
Paper support assy. removal
1. Release two protrusions for securing the paper support assy. to ASF frame.
n
Housing (left/right) removal
1 2
1. Remove the screw ( , x1, , x1) for securing the housing (left/right).
3
2. Release the hook ( , x1) forward by using screwdriver.
4
3. Release the hook ( , x1) by inserting minus screwdriver between the housing
(lower) and the housing (left/right).
4. Release "Carriage Lock" with the tweezers or alike, then move "Carriage
unit" to the centre of the printer.
5. Remove the housing (left/right) by insert your hand to the printer mechanism.
Revision A
37