EPSON Stylus Pro 4400/4450/4800/4880/4880C
8. Remove the "E-ring, 6" from the "Shaft, Roller, LD".
9. Draw out the "Shaft, Roller, LD" to the direction shown in
remove both the "Roller Assy., LD, Left" and the "Roller Assy., LD, Right".
All the parts shown in
drawing the "Shaft, Roller, LD". Install the parts to the
"Shaft, Roller, LD" in the correct order and direction, refering
the
Figure
4-69.
Disassembly & Assembly
Figure 4-69
Figure 4-69
are released when
Disassembly Procedures
to
Compression Spring, 0.407
Holder, Edge Guide, Left
Roller Assy., LD, Left
Shaft, Roller, LD
E-ring
Figure 4-69. "Roller Assy., LD, Left" and "Roller Assy., LD, Right"
Roller Assy., LD, Right
Compression Spring, 0.4
Roller, Sub, LD, Middle
Roller, Sub, LD, Middle
Compression Spring, 0.4
Drawing Direction of Shaft
Removal
Revision C
258