Operation Panel - Toshiba E-Studio 202s Operator's Manual For Basic Function

OPERATION PANEL

Exposure mode selector key and
1
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.41)
Light and dark keys and indicators
2
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level is
shown by a lit indicator. (p.41) Use to start
and terminate user program setting. (p.46)
Alarm indicators
3
Developer replacement required
indicator (p.61)
Misfeed indicator (p.55)
Toner cartridge replacement
required indicator (p.48)
Maintenance indicator (p.61)
ADF indicator*
4
ADF misfeed indicator*
5
Copy ratio selector key and
6
indicators
Use to sequentially select preset reduction/
enlargement copy ratios. Selected copy ratio
is shown by a lit indicator. (p.43)
Copy ratio display (%) key
7
• Use to verify a zoom setting without
changing the zoom ratio. (p.43)
• Use to check the number of originals
that must be returned to the document
feeder tray if a misfeed occurs in the
machine when the ADF is used. (p.60)
Display
8
Displays the specified copy quantity,
zoom copy ratio, user program code
and error code.
*1 Only operates when an ADF is installed.
*2 Peripheral device
8
AB system
1
(p.40)
1
(p.59)
SCAN key and indicator (p.25, p.33)
9
ONLINE key and indicator
10
Lights up when the unit is used as a
printer and scanner. For description of the
ONLINE indicator, see "INDICATORS ON
THE OPERATION PANEL" (p.25).
Start key and indicator
11
• Copying is possible when the
indicator is on.
• Press to start copying
• Use to set a user program. (p.46)
Power save indicator
12
Lights up when the unit is in a power
save mode. (p.44, p.46)
Tray select key
13
Use to select a paper feed station
(paper tray 1, paper tray 2*
bypass tray). (p.43)
Paper feed location indicators
14
Light up to show the selected paper
feed station.
ZOOM keys and indicator
15
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (When the
ADF is being used, the zoom copy ratio
range is 50% to 200%.) (p.43)
Copy quantity keys
16
• Use to select the desired copy
quantity (1 to 99). (p.41)
• Use to make user program entries. (p.46)
Clear key
17
• Press to clear the display, or press
during a copy run to terminate
copying. (p.41)
• Press and hold down during standby
to display the total number of copies
made to date. (p.47)
2
or multi-