13.6.2
ADU driving PC board (ADU)
(1)
Take off the ADU.
P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2)
Disconnect 2 connectors, release the latch
and take off the ADU driving PC board.
13.6.3
ADU motor (M8)
(1)
Take off the ADU.
P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2)
Disconnect 1 connector, remove 2 screws
and take off the ADU motor with the bracket.
(3)
Remove the gear.
(4)
Remove 2 screws and take off the ADU
motor.
e-STUDIO182/212/242
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
Latch
Connector
ADU motor
Gear
© 2009 TOSHIBA TEC CORPORATION All rights reserved
13 - 12
ADU driving PC board
Fig. 13-10
Bracket
Fig. 13-11
ADU motor
Fig. 13-12