Basler BE1-11g Instruction Manual page 699

9424200994 Rev U
Firmware
Version and Date
2.10.00, Jul-16
2.11.01, May-17
Software
Version and Date
2.04.01, May-09
2.05.00, Jul-09
BE1-11g
•
Added a setting for DNP port selection (Ethernet or RS-485)
when RS-485 Port Protocol option is "None" and Ethernet
Protocol option is 3 or 4
•
Added a setting to select individual items for scrollable metering
•
Added a setting to enable/disable display of splash screen on
power up
•
Added user programmable targets
•
Added Initiated output to 25A logic element in BESTlogicPlus
•
Added mail from domain setting for emails from device
•
Added 50 Reset Delay setting
•
Improved the 50 element time delay on J case systems
•
Improved 3I0 metering on 1A, J case systems
•
Improved web server reliability
•
Improved security of IEC 61850
•
Corrected power quality voltage harmonics metering on 3W
systems
•
Corrected oscillography analog channel number for IG when a
single CT was used
•
Corrected syncing when 25A is in Anticipatory mode
•
Corrected targets displaying as active after reset
•
Added 100 Hz nominal frequency
•
Added logic labels to scrolled metering
•
Added DNP Alarm Mask setting
•
Added group targets
•
Added contact output Hold Time setting range
•
Added Calculation Type setting for the 50 element
•
Added variable inverse voltage curves for the 27P, 27X, 59P,
and 59X elements
•
Added Logic Alarms Status and Relay Alarms Status on the
Status Page in BESTnetPlus
•
Added the ability to edit Contact Input Debounce/Recognition
through the front panel
•
Added the ability to upload security certificates for secure
connections
•
Added Breaker Close Pulse Time setting to the 25A element
•
Changed Targets Reset announcement to not constantly toggle
in the sequence of events when the targets reset logic bit is high
•
Changed the real-time clock to display the correct period on the
front-panel LCD during the 12 a.m. and 12 p.m. hours
•
Changed IRIG function so it resets after reboot when using IRIG
without year decoding
•
Changed to prevent 40Z pickup when 60FL is true
•
Improved Modbus Auto Save feature
•
Improved anticipatory synchronizer close angle
•
Improved Fast Current Detect alarm
Table 270. BESTCOMSPlus® Software Revision History
•
Initial release
•
Updated Basler Electric Device Package Uploader screen
•
Changed 40Q pickup range for 1A CTs from 0-6000 to 0-1200
•
Added timing curve graphs for 27 and 59 functions when using
inverse timing mode
Change
Change
687
Revision History