Basler BE1-11g Instruction Manual page 43

9424200994 Rev U
and no screens are selected, the splash screen is displayed even if the Show Splash Screen setting is
disabled. Scrolling screen items can only be selected in BESTCOMSPlus.
Targets and alarms are automatically displayed on the front-panel LCD when they become active if on the
splash screen. After targets and alarms are reset, the BE1-11g returns to the main screen and begins
scrolling if scrolling is enabled. Press the RIGHT navigation key to access the menu when targets and
alarms are being displayed.
Locator
A LCD Contrast Value
B Invert Display
C Sleep Mode
D Sleep Mode Time Delay
E Language Selection
F Enable Scroll
G Scroll Time Delay
H Show Splash Screen
I Scrollable Metering Settings
BE1-11g
Figure 26. Front-Panel Display Setup Screen
Table 4. Settings for Front-Panel Display
Setting
Disabled or Enabled
Disabled or Enabled
English or Russian
Disabled or Enabled
Disabled or Enabled
All Metering Screens
Range Increment
25 to 100 1
n/a
n/a
1 to 120 1
n/a
n/a
1 to 600 1
n/a
n/a
31
Unit Default
percent 50
n/a Disabled
n/a Enabled
seconds 1
n/a English
n/a Enabled
seconds 3
n/a Enabled
n/a None
Controls and Indicators