Basler BE1-11g Instruction Manual page 697

9424200994 Rev U
Firmware
Version and Date
2.06.02, Dec-12
2.06.03, Mar-13
2.06.04, Mar-13
2.07.00, Nov-13
2.08.00, Apr-14
2.08.01, May-14
BE1-11g
•
Improved 87N operation
•
Improved logic timers
•
Improved SEF pickups
•
Improved output override operation through the front panel
•
Improved 51, 25, and 25A element operation
•
Improved port access timers
•
Improved angle compensation in differential report
•
Added DNP data
•
Improved 21 element operation
•
Improved distance to fault measurement
•
Made alarms available in BESTlogicPlus
•
Expanded Target Reset logic point to operate from all target
reset requests
•
Added an option to Modbus to perform group saves to reduce
write times
•
Made Settings Group available in scrolling screens
•
Added Power Loss alarm
•
Eight additional 49RTD elements
•
Improved 60FL coordination when upstream breakers open
•
Improved tracking of failed login attempts with bad user names
•
Improved reporting of breaker operate time
•
Added logic nodes and made minor improvements to IEC 61850
protocol
•
Added a Language Selection setting to choose language for the
front-panel display
•
Added Russian language option
•
Corrected accuracy of 25A voltage monitor dropout timer and
slip frequency
•
Updated Time Dial range for IEC curves in the 51 element
•
Improved 78V for frequency out-of-range operation
•
Added output hold timer to 78V
•
Improved Frequency Out-of-Range alarm to indicate when any
source is out of range instead of when all sources are out of
range
•
Improved 60FL operation to prevent chance of nuisance alarm
during settings group change
•
Improved 40Q operation for single-phase connections
•
Improved Modbus response to reads with incorrect ID
•
Changed clock priority setup to prevent user from accidentally
disabling internal real-time clock
•
Corrected issue that prevented front-panel select and operate
switches from operating the 43 switches
•
Corrected placement of data on scrolling metering screens
Change
685
Revision History