HP Designjet 3D Service Manual page 381

Figure 363: Measuring distances from outside edges of D and G
19. Measure and record the diameter of circle D along the center line
between A and G. See
Figure 364: Measuring diameter of circle D
20. Add the lengths derived from steps 18 and 19 (A-D and D-G) and then
subtract the width of circle D derived from step 20. Record this total as
"GLeft"
21. Measure and record the distance from the outside edge of circle G to
the outside edge of circle H. See
Figure 365: Measuring distances from outside edges of G and H
Figure 383
Figure 384
-365