Removing The Xy Table - HP Designjet 3D Service Manual

Hardware

Removing the XY table

1. Remove the top panel. See
2. Remove the side panels. See
3. Remove the front panel. See
4. Using a
-282
• Wire tie
3
• 10-32 x ⁄ " slotted screws (x14)
8
1
• 10-32 x ⁄ " slotted screws (x4)
2
1
• 10-32 x ⁄ " socket head cap screws (x4)
2
1
• 8-32 x ⁄ " socket head cap screws (x4)
2
1 1
• ⁄ - 20 x ⁄ " button head cap screws (x2)
4 2
5
⁄ " nut driver or standard screwdriver, remove the left side
16
access panel mounting screws and remove the left side access panel.
See Figure 245.
"Removing the top panel" on page 161
"Removing the side panels" on page 162
"Removing the front panel" on page 166