Electronics Bay Cooling Fan; Removing The Electronics Bay Cooling Fan - HP Designjet 3D Service Manual

Electronics Bay Cooling Fan

Required Tools
5
• ⁄ " nut driver or standard screwdriver.
16
5
• ⁄ " allen wrench.
64
Hardware
½
• 6-32 x 1 " flat head cap screws (x4)

Removing the electronics bay cooling fan

1. Remove the top panel. See
2. Remove the side panels. See
3. Open the Electronics Bay. See
page 171
4. Touch the metal plate of the electronics bay cover to discharge any static
electricity.
5. Disconnect the P1 cable from the fan. See
Figure 86: Electronics bay cooling fan connector location
P1 Connector
5
6. Using a ⁄ " allen wrench, remove the 4 mounting screws. See
64
87.
"Removing the top panel" on page 161
"Removing the side panels" on page 162
"Opening the electronics bay" on
Figure 86.
Figure
-177