Y Drive Rod; Removing The Y Drive Rod; Xy Tabley Drive Rod - HP Designjet 3D Service Manual

Y Drive Rod

Required Tools
Hardware

Removing the Y Drive Rod

1. Remove the top panel. See
2. Remove the side panels. See
3. Remove the upper electronics bay cover. See
4. Remove the left side access panel. See
-272
5
• ⁄ " nut driver or standard screwdriver.
16
• Dial indicator and belt tension gauge assembly
3
• 10-32 x ⁄ " slotted screws (x30)
8
• 3- 1 6 x 1" fender washer
tronics bay cover" on page 173
"Removing the top panel" on page 161
"Removing the side panels" on page 162
"Removing the upper elec-
Figure 231.