Y Motor; Removing The Y Motor - HP Designjet 3D Service Manual

Y Motor

Required Tools
Hardware

Removing the Y motor

1. Remove the top panel. See
2. Remove the side panels. See
3. Remove the upper electronics bay cover. See
4. Remove the left side access panel. See
5. Disconnect the Y motor cable by pressing in on the tab and pulling
-260
5
• ⁄ " nut driver or standard screwdriver.
16
9
• ⁄ " allen wrench.
64
3
• 10-32 x ⁄ " slotted screws (x1 1)
8
1
• 8-32 x ⁄ " socket head cap screws (x4)
2
tronics bay cover" on page 173
Figure 213: Left side access panel mounting screw locations
Remove the 7
mounting screws.
upward. See Figure 214.
"Removing the top panel" on page 161
"Removing the side panels" on page 162
"Removing the upper elec-
Figure 213.