HP Designjet 3D Service Manual page 294

24. Using a
25. Locate and remove the 4 upper Y drive rod mounting screws with a
-278
Figure 241: Lower Y drive rod mounting screw locations
Lower Y drive rod mounting
5
⁄ " nut driver or standard screwdriver, remove the 2 Y drive
16
rod mounting screws. See
Figure 242: Y drive rod mounting screws
Left side mounting screw
nut driver or standard screwdriver. See
screw locations
Figure 242.
Right side mounting screw
Figure 243.
5
⁄ "
16