Installing The Head Cooling Fan - HP Designjet 3D Service Manual

Figure 134: Head cooling fan mounting screw locations
Remove the 2
mounting screws
6. Remove the head cooling fan.

Installing the Head Cooling fan

1. Align the head cooling fan with the 2 mounting holes.
7
2. Using a ⁄ " allen wrench, reinstall the 2 mounting screws.
64
3. Reconnect the J258 cable.
4. Install the upper electronics bay cover. See
ics bay cover" on page 174
5. Install the side panels. See
6. Install the top panel. See
"Installing the upper electron-
"Installing the side panels" on page 164
"Installing the top panel" on page 162
-211