HP Designjet 3D Service Manual page 304

25. Using a
26. Using a
-288
Figure 255: Right side X guide rod mounting screw locations
Remove the 2 right
side X guide rod
mounting screws
5
⁄ " allen wrench, remove the right side front Y guide rod
32
mounting screw. See
Figure 256: Right side front Y guide rod mounting screw location
Remove the right front
Y guide rod mounting
screw
5
⁄ " allen wrench, remove the right side rear Y guide rod
32
mounting screws and remove the right side Y guide rod. See
Figure 256.
Figure 257.