Wavy Surface - HP Designjet 3D Service Manual

Wavy surface

Characteristics: One side of the model will have wavy build.
Wavy
Normal
Corrective actions:
1. Run Z and Offset calibrations.
2. Reprocess the part using the latest version of HP Designjet 3D Software
Solution software and check STL report for errors.
3. Check for STL errors in CAD software.
4. Replace the tip shrouds.
5. Loose tips screws, tighten the screws.
6. Replace the tips.
7. Deformed toggle spring, replace the toggle spring.
8. Check X/Y guide rods for loose hardware. Replace XY table as needed.
-150