Hard Drive; Removing The Hard Drive - HP Designjet 3D Service Manual

Hard Drive

Required Tools
5
• ⁄ " nut driver or standard screwdriver.
16
• Phillips screwdriver
Hardware
1
• 6-32 x ⁄ " Phillips pan head screws (x8)
4

Removing the hard drive

1. Open the electronics bay. See
page 171
2. Touch the metal plate of the electronics bay cover to discharge any static
electricity.
3. Disconnect the power input cable by pressing the metal tab in and pull-
ing down. See Figure 104.
Figure 104: Hard drive power cable location
Disconnect the power
input cable
4. Disconnect the SATA cable by pressing the metal tab in and pulling
down. See Figure 105.
"Opening the electronics bay" on
-191