Establishing Communication On A Static Network; Setting The Static Network In Windows Xp; Setting The Static Network In Windows Vista - HP Designjet 3D Service Manual

Establishing communication on a static network:

If you are using a static network or connecting the printer directly to a
workstation, you will need to enter the static IP address information into the
workstation and the printer. If you are using a static network and your
computer already has network access, see
printer:" on page 28.
1. Set the static IP address information in the workstation:
A. For Windows XP, see
static network:" on page 27.
B. For Windows Vista, see
Windows Vista:" on page 27.
C. For Windows 7, see
7:" on page 28.
2. Set the static IP address information in the printer, see
network on printer:" on page 28.
3. Establish communication, see

Setting the static network in Windows XP:

1. From your workstation open the Control Panel and double click on
Network Connections.
2. Right click on Local Area Connection and then left click on Properties.
3. Select Internet Protocol (TCP/IP) from the list.
4. Click on the Properties button.
5. Click on the Use the following IP address option.
6. Enter the IP Address, Subnet Mask and Default Gateway. Contact your
IT Administrator or Internet Service Provider for details regarding IP
address information.
7. Click on the OK button when finished. Close any open networking win-
dows.

Setting the static network in Windows Vista:

1. From your workstation click on the Start Menu.
2. Click on the Control Panel button.
3. Double click on Network and Internet.
4. Double click on the Network and Sharing Center icon.
5. Left click on Manage network connections.
6. Right click on the Local Area Connection icon then left click on Proper-
ties.
7. Select Internet Protocol Version 4 (TCP/IPv4) from the list.
8. Click on the Properties button.
9. Click on the Use the following IP address option.
"Setting the static network on
"Establishing communication on a
"Setting the static network in
"Setting the static network in Windows
"Establish communication:" on page 29.
"Setting the static
-27