Installing The Left Side Heater - HP Designjet 3D Service Manual

7. Remove the heater.

Installing the left side heater

1. Align the heater with the mounting posts.
2. Insert the insulating washers and reinstall the mounting screws using a
3. Reinstall the black power wire on the left mounting post using a
4. Reinstall the white power wire on the right mounting post using a
5. Align the heater panel with the mounting holes.
6. Using a
7. Install the side panels. See
8. Install the top panel. See
-314
Figure 293: Left side heater mounting screw locations
5
⁄ " nut driver or standard screwdriver.
16
driver.
driver.
5
⁄ " nut driver or standard screwdriver, reinstall the 4 heater
16
panel mounting screws.
"Installing the side panels" on page 164
"Installing the top panel" on page 162
Remove the mounting
screws
3
⁄ " nut
8
3
⁄ " nut
8