Installing The Left Side Thermal Fuse - HP Designjet 3D Service Manual

Figure 299: Left side thermal fuse mounting screw locations
Remove the
mounting screws
6. Remove the thermal fuse.

Installing the left side thermal fuse

1. Align the thermal fuse with the mounting holes.
2. Using a standard screwdriver, reinstall the 2 mounting screws.
3. Reconnect LTH1 and LTH2 spade connectors.
4. Align the heater panel with the 4 mounting holes.
5
5. Using a ⁄ " nut driver or standard screwdriver, reinstall the 4 mounting
16
screws.
6. Reinstall the side panels. See
7. Reinstall the top panel. See
"Installing the side panels" on page 164
"Installing the top panel" on page 162
-318