HP Designjet 3D Service Manual page 347

29. Mark a location on each corner of the platen surface with a marker See
figure 314and figure
same locations when leveling the table.
Figure 314: HP Designjet 3D (8in x 6in) Z stage table location points
BL (Back Left)
FL (Front Left)
Figure 315: HP Designjet Color 3D (8in x 8in) Z stage table location points
BL (Back Left)
FL (Front Left)
30. Attach a dial indicator to the head bracket.
31. Attached the head bracket to the toggle head assembly.
32. Move the dial indicator to the back left (BL) corner over the marked loca-
tion.
315. These marks will be used to reference the
BR (Back Right)
BR (Back Right)
FR (Front Right)
FR (Front Right)
-331