Installing The Right Side Heater; Removing The Left Side Heater - HP Designjet 3D Service Manual

7. Remove the heater.

Installing the right side heater

1. Align the heater with the mounting posts.
2. Insert the insulating washers and reinstall the mounting screws using a
3. Reinstall the white power wire on the left mounting post using a
4. Reinstall the black power wire on the right mounting post using a
5. Align the heater panel with the mounting holes.
6. Using a
7. Install the side panels. See
8. Install the top panel. See

Removing the left side heater

1. Remove the top panel. See
2. Remove the side panels. See
3. Using a
-312
Figure 290: Right side heater mounting screw locations
5
⁄ " nut driver or standard screwdriver.
16
driver.
nut driver.
5
⁄ " nut driver or standard screwdriver, reinstall the 4 heater
16
panel mounting screws.
5
⁄ " nut driver or standard screwdriver, remove the 4 mounting
16
screws and remove the heater panel. See
"Installing the side panels" on page 164
"Installing the top panel" on page 162
"Removing the top panel" on page 161
"Removing the side panels" on page 162
Figure 291.
Remove the
mounting screws
3
⁄ " nut
8
3
⁄ "
8