Chapter 6 Unpacking The M40E Router; Tools And Parts Required To Unpack The M40E Router; Unpacking The M40E Router - Juniper M40E Hardware Manual

CHAPTER 6

Unpacking the M40e Router

Tools and Parts Required to Unpack the M40e Router

Related
Documentation
Unpacking the M40e Router
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Tools and Parts Required to Unpack the M40e Router on page 73
Unpacking the M40e Router on page 73
Verifying the M40e Parts Received on page 75
To unpack the router and prepare for installation, you need:
Phillips (+) screwdriver, number 2
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the shipping
pallet
Blank panels to cover any slots not occupied by a component
M40e Chassis Description on page 8
M40e PIC Overview
M40e Site Preparation Checklist on page 67
General Safety Guidelines and Warnings for M Series, MX Series, and T Series Routers
on page 229
The router is shipped in a wooden crate and bolted to the pallet that forms the bottom
of the crate. The crate also contains an accessory box, the handle used during manual
router installation, and the M40e Multiservice Edge Router Quick Start.
NOTE: The router is maximally protected inside the shipping crate. Do not
unpack it until you are ready to begin installation.
To unpack the router:
73