Huawei NetEngine80E Configuration Manual - Reliability page 1252

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Backup mode
Slot-Number
Card-Number
Port-Number
Nas logic-port
Nas logic-ip
Nas logic-sysname
Traffic interval
When the RBS is configured successfully, you can view that the TCP connection status is
Connected.
<RouterA> display remote-backup-service service1
----------------------------------------------------------
Service-Index
Service-Name
TCP-State
Peer-ip
Source-ip
TCP-Port
Track-BFD
Track-interface0 : GigabitEthernet2/0/0
Track-interface1 : --
----------------------------------------------------------
ip pool:
ipv6 pool:
Failure ratio
Failure duration : 0 min
NAT instance : nat1
----------------------------------------------------------
Rbs-ID
Protect-type
Next-hop
Vlanid
Peer-ip
Vrfid
Tunnel-index
Tunnel-state
Tunnel-OperFlag: NORMAL
Spec-interface : GigabitEthernet3/0/0
Out-interface
User-number
After users go online, the information about backup users can be displayed.
<HUAWEI> display backup-user
Remote-backup-service: service1
Total Users Numer: 10
------------------------------------------------------------------------
100
------------------------------------------------------------------------
The information about logged-in users on a specific interface can be displayed.
Issue 02 (2014-09-30)
: hot
: 1
: 0
: 0
: Gigabitethernet 1/0/0
: 1.2.3.4
: huawei
: 10(minutes)
: 0
: service1
: Connected
: 88.88.88.88
: 22.22.22.22
: 2046
: --
poolv4_yyz metric 10
r3 metric 10
r4 metric 20
remotev4 metric 10
1234 metric 10
iana_yyz metric 10
iapd_yyz metric 10
lo metric 10
loc_vpn metric 10
nd metric 10
pd metric 10
remote_del_yyz metric 10
remotev6_yyz metric 10
: 100%
: 0
: ip-redirect
: 10.1.1.7
: 0
: 10.1.1.7
: 0
: 0x0
: UP
: GigabitEthernet3/0/0
: 0
101 102 103
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Multi-node Backup Configuration
104 105 106 107 108 109
1235