Huawei NetEngine80E Configuration Manual - Reliability page 1280

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
Issue 02 (2014-09-30)
discriminator remote 1
commit
#
interface gigabitethernet 1/0/0.2
vlan-type dot1q 200
ip address 10.0.1.2 255.255.255.0
vrrp vrid 1 virtual-ip 10.0.1.100
admin-vrrp vrid 1
vrrp vrid 1 track bfd-session 2 peer
vrrp vrid 1 track interface gigabitethernet 2/0/0 reduced 50
#
remote-backup-service service1
peer 22.22.22.22 source 88.88.88.88 port 2046
track interface gigabitethernet 2/0/0
protect ip-vpn-instance vpna peer-ip 44.44.44.44
#
interface Tunnel1/0/0
ip address unnumbered interface LoopBack2
tunnel-protocol mpls te
destination 1.1.1.1
mpls te tunnel-id 100
mpls te reserved-for-binding
mpls te commit
#
tunnel-policy policy2
tunnel binding destination 1.1.1.1 te Tunnel1/0/0
#
remote-backup-profile profile1
service-type bras
backup-id 10 remote-backup-service service1
peer-backup hot
vrrp-id 1 interface gigabitethernet 1/0/0.2
nas logic-ip 1.2.3.4
nas logic-port gigabitethernet1/0/0
nas logic-sysname huawei
traffic backup interval 10
#
interface gigabitethernet 1/0/0.1
user-vlan 50
remote-backup-profile profile1
bas
access-type layer2-subscriber
authentication-method
#
interface GigabitEthernet 2/0/0
ip address 10.0.2.1 255.255.255.0
mpls
mpls te
mpls rsvp-te
#
bgp 100
peer 1.1.1.1 as-number 100
peer 1.1.1.1 connect-interface LoopBack2
#
ipv4-family unicast
undo synchronization
peer 1.1.1.1 enable
#
ipv4-family vpnv4
policy vpn-target
peer 1.1.1.1 enable
#
ipv4-family vpn-instance vpna
peer 10.3.1.1 as-number 65430
import-route unr
import-route direct
#
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
web
11 Multi-node Backup Configuration
1263