Object Properties Of A Recipe - Siemens SIMATIC PCS7 Manual

Activation of
recipe
management
functions
Copy
Delete
Recipe object
properties
Dyeing_unit_R V001
Dyeing_unit_R V001
Dyeing_unit_R V001
General Description
Recipe: Dyeing_unit_R
Version: V001
Product: Max. and Sirius finish dyeing
Standard batch
Quantity: 100.
Created by: Greville, 12.08.96 13:40
Processed by: Greville, 12.08.96 13:40
OK
Figure 3-8

Object properties of a recipe

Batch flexible , Manual
C79000-G7076-C650-02
You can select one or more recipes from the recipes list displayed and then
activate the desired recipe management function via the Batch flexible menu
or the Edit' menu or the 'Context' menu.
When you copy a recipe, in the following menu you must type in a new name
and/or a new version identifier. The recipe which has been copied will be
given the state 'incomplete'.
The recipe you have selected will be deleted after a confirmation check. This
function cannot be reversed. When more than one recipe was selected, you
will be asked to confirm deletion for each recipe separately.
You can access recipe object properties when the recipe overview list and the
recipe have been selected. This is done via the 'Edit' menu by selecting
'Object properties' or via the 'Context' menu. The general recipe data will
now appear. You can access further information by clicking on the index card
tab:
$ variables Meas. points
Min. batch
200.
BATCH flexible Object Manager
Products Equipment allocation
Status: Release canceled
Run time: 0
Quality:
Normal
Max. batch Unit
300. t
Cancel
minutes
Help
3-15